Teacher Notes
Learning objectives
-
Relate visible colours to bands of wavelength and frequency, and explain how a prism separates white light.
-
Predict the colour seen on a screen or at the eye by identifying which wavelengths are available, absorbed, transmitted or reflected.
-
Explain specular and diffuse reflection using the normal at the point where each ray strikes.
-
Distinguish transparent, translucent and opaque materials using evidence about light transmission and image clarity.
Using the studio
Each bench can be used on its own. Ask for a prediction before selecting Trace light. Use Step to stop at the next stage, then Inspect after the trace is complete to check the explanation against the result.
Prism & spectrum
Send white light through the prism. Once the spectrum appears, move the probe from red towards violet. Wavelength decreases, frequency increases and violet deviates most. Switch to Single band at 650 nm and ask what the prism can separate. The screen shows one red spot because the source supplies only a narrow band.
Colour filters
Use a white lamp and a yellow first filter. Leave the second slot empty, then add a cyan filter. Ask pupils to name the components between the filters before predicting the final spot. Red and green pass the yellow filter. Cyan transmits green and blue, so only green reaches the screen.
Object colour
Choose a white lamp, red tile and green filter. Put the filter At the eye, then move it At the lamp. The observer sees black both times. At the eye, the filter absorbs red light reflected by the tile. At the lamp, only green reaches the tile and the tile absorbs it. Ask pupils to point to where the absorption happens in each run.
Reflection
Set the beam to 40° and compare Smooth and Rough surfaces. Show Local normals and inspect the angle pairs. On the smooth surface the reflected rays stay parallel. On the rough surface the normals point in different directions, yet each ray’s angle of reflection still equals its angle of incidence.
Materials
Select Stripes and compare green glass, frosted glass and black card. First ask “Does light get through?” Then ask “Can you distinguish the stripes?” Green glass gives sharp green stripes, frosted glass blurs them by scattering transmitted light, and black card hides them. Try polished metal to show that an opaque material can reflect strongly.
Teaching tips and common misconceptions
-
The prism’s white lamp represents a continuous spectrum. The filter and object benches use three representative red, green and blue components. Real filters can transmit a range of wavelengths, including wavelengths between those represented by the three components.
-
When pupils say “the filter makes the light green”, try a red lamp with a green filter. The screen stays dark. Ask which wavelengths the lamp would need to supply for green light to emerge.
-
On the rough reflector, the slider gives the beam’s angle to the vertical. To find the angle of incidence for an individual ray, measure from its local normal.
Display and independent learning
For projection, use Full screen and Step to pause before the light reaches a filter, tile or screen. For independent work, pupils can open Challenge, make a prediction and use Set up bench to test it. Use Keep result at the end of each of two trials. The Notebook shows both observations side by side for the current session. Ask pupils to finish with one sentence explaining what changed along the light path.
Practical safety
The virtual investigations require no physical apparatus. If you follow up with a ray box, filters or glass prisms, use your school’s risk assessment for the equipment.